Pool Resurfacing
Swimming pool plaster removal and resurfacing in Davis and Weber County — plaster, pebble aggregate, and quartz finishes. Extend the life of an existing pool shell without replacement.
When pool resurfacing is needed and what the process involves
Plaster pools typically need resurfacing every 10 to 15 years, sometimes sooner if the water chemistry wasn't well maintained. Signs that resurfacing is due: rough, abrasive surface (catches on skin); visible staining that doesn't respond to chemical treatment; chipping or spalling where chunks of plaster come off; visible cracks in the plaster surface. These are surface issues — they don't mean the shell itself has failed, just that the plaster finish has worn out.
The resurfacing process starts with draining the pool completely and using a chisel and grinder to remove the existing plaster down to the concrete shell. The shell is inspected — cracks and defects are repaired before the new surface is applied. Then the new finish is troweled on and the pool is filled and started up with carefully managed fill water chemistry. Improper chemistry during the cure period can stain the new surface within days of completion — we control this process carefully.
Finish options: plaster, pebble, and quartz
Standard white plaster is the lowest-cost resurfacing option and looks good when new. Its main limitation is that it's the softest and most porous of the finish options — it stains more readily and requires the most careful water chemistry to maintain. It'll need resurfacing again in 10 to 15 years depending on how well chemistry is maintained. Colored plaster options are available and don't cost significantly more.
Pebble aggregate finishes mix small river pebbles into the plaster — the result is a textured surface that's more durable, more algae-resistant, and more visually interesting than flat plaster. Pebble surfaces last 20 to 25 years under normal conditions. Quartz aggregate is between plaster and pebble — a smooth-ish surface with significantly better stain resistance and durability than plain plaster. For Davis County pools that will see a full season of use and winters that demand chemical attention, we generally recommend pebble or quartz over standard plaster for longevity.
Pool Resurfacing Pricing in Utah
Pool resurfacing cost depends on pool size and finish type. These are typical ranges for an average-size residential pool in Davis County.
Standard white or colored plaster
Plaster removal, shell prep, new plaster application
$6,000 – $10,000
Quartz aggregate finish
Better stain resistance and durability over plaster
$9,000 – $14,000
Pebble aggregate finish
Most durable finish; 20-25 year lifespan with proper care
$12,000 – $20,000
Pool surface looking rough?
Send us photos of the current condition and your pool dimensions. We'll let you know what we're looking at.
Pool Resurfacing Questions
Common questions about pool plaster condition, finish options, and what resurfacing involves.
The clearest signs: surface feels rough or like sandpaper to your feet and hands; staining that doesn't respond to acid washing or chemical treatment; visible chipping or spalling where plaster chunks are coming off; cracks in the plaster (surface cracks, not the shell). If the pool is 10 to 15 years old and you're noticing any of these, it's worth getting an assessment. Contact us with photos and we can give you a preliminary read before scheduling a site visit.
The work phase for resurfacing (plaster removal, shell prep, and new finish application) typically takes 5 to 10 days. After the new finish is applied, the fill and startup process requires 2 to 3 weeks of careful water chemistry management before the pool is fully ready for normal use. Total downtime from draining to swim-ready is usually 3 to 4 weeks.
Pebble finish (sold under brand names like Pebble Tec) is a plaster mix containing small river pebbles — typically 1/8 to 3/8 inch stones embedded in white or colored plaster. The exposed pebble aggregate creates a textured, organic-looking surface that's significantly more durable than plain plaster. Pebble finish resists staining, is naturally algae-resistant, and typically lasts 20 to 25 years with proper water chemistry.
Pool resurfacing requires temperatures above freezing during application and the initial cure period. In Utah, this limits resurfacing work to roughly April through October. Late fall and early spring resurfacing is possible with favorable weather conditions. We schedule resurfacing projects during the season and can often get pool resurfacing done before or after the swim season if you plan ahead.
In most cases, yes. The labor cost of resurfacing is the same regardless of which finish you use — you're paying for the drain, removal, prep, and application whether it's plaster or pebble. Upgrading from plaster to quartz or pebble adds 30 to 80% to material cost but can double or triple the time before you need to resurface again. If you're going through the process, it usually makes sense to go with the most durable finish you can afford.
Pool Resurfacing — Davis County, Utah
Old plaster is fixable. A new finish changes the pool.
What our clients say about pool resurfacing
Pool Resurfacing Service Areas in Utah
We serve Davis County, Weber County, Salt Lake County, and Utah County.
How to get started.
Three simple steps from first call to finished job.
Contact Us
Complete the quick form to share your needs. We respond the same day — often within an hour.
Get free quote →Schedule Your Estimate
We'll arrange a visit at a time that works for you and provide an in-person, plain-english estimate.
Get free quote →Get the Job Done
Once approved, we schedule a date and work hard to exceed expectations. If it's not right, we come back.
Get free quote →