Concrete Resurfacing
Overlay worn, stained, or surface-cracked concrete without a full tearout. Driveways, patios, pool decks, and walkways across Davis and Weber County. When the slab underneath is still structurally sound, resurfacing is a fraction of the cost of replacement and looks clean when it's done right.
When resurfacing is the right call
Resurfacing applies a polymer-modified overlay to an existing slab. It bonds to the old concrete and gives you a new wearing surface, but it depends entirely on what's underneath. If the slab has structural cracks, significant settling, or a compromised base, an overlay won't fix those problems — it will just hide them temporarily. Before we quote a resurface job, we assess the existing slab for suitability.
Good candidates for resurfacing: driveways and patios that are 10 to 25 years old with surface wear, shallow scaling from Utah freeze-thaw cycles, staining from oil or rust, or minor surface cracks that haven't moved. If you're dealing with active structural cracks or settled sections, those need to be addressed first — or we move to full replacement. Resurfacing a bad slab is a short-lived fix and we won't sell you one.
Finish options and what the process looks like
We prep the slab by pressure washing, repairing surface cracks with appropriate filler, and profiling the surface so the overlay bonds properly. Skipping prep is where resurfacing jobs fail — the overlay will delaminate if the old surface isn't clean and mechanically sound. Once prepped, we apply the overlay system and finish it to match your preference.
Finish options: standard broom finish (matches the look of new concrete), exposed aggregate texture, or a light stamp pattern applied to the resurfaced layer. Color can be added through integral pigment or surface-applied stain. Outdoors in Utah, we use UV-stable products rated for freeze-thaw cycling — not interior-grade overlays. Cure time before foot traffic is typically 24 hours; vehicle traffic 72 hours.
Concrete Resurfacing Pricing in Utah
Cost depends on the overlay system chosen, the condition of the existing slab, and the prep work required. Heavily scaled or stained surfaces cost more to prep properly.
Standard overlay (broom or smooth finish)
Clean slab in good condition, standard finish
$3 – $6 / sq ft
Textured or exposed aggregate overlay
Non-slip texture, good for pool decks and patios
$6 – $10 / sq ft
Decorative stamped overlay
Pattern and color applied to resurfaced layer
$8 – $15 / sq ft
Crack prep and repair before overlay
Required for surface cracks before resurfacing
$3 – $8 / lin ft
Not sure if resurfacing is right for your slab?
Send us photos of the surface and any cracks. We can tell you quickly whether it's a candidate for overlay or whether it needs repairs or replacement first.
Concrete Resurfacing Questions
Common questions about overlay systems, suitability, and what to expect in Utah's climate.
A properly done overlay on a sound slab typically lasts 8 to 15 years in Utah's climate. The main factors are: quality of the overlay material, how well the prep was done, and whether the slab underneath was actually a good candidate to begin with. Maintenance sealcoating every 2 to 3 years extends the life significantly.
It depends on the cracks. Hairline and surface cracks that are stable can be filled and overlaid successfully. Structural cracks — ones that go through the full depth of the slab, show vertical displacement, or are still moving — need to be repaired or the section replaced before any overlay is applied. Putting an overlay over an active crack just means the crack telegraphs back through the new surface within a season or two.
Resurfacing applies a thin overlay (typically 1/8 to 1/4 inch) to the existing slab. It restores the surface appearance and adds a new wearing layer, but it does nothing for the structural slab underneath. Replacement tears out the old concrete, hauls it away, and pours a full new slab. Resurfacing costs 30 to 60 percent less than replacement when the existing slab is sound, which is why it makes sense when the underlying concrete still has structural life in it.
Most overlays we apply are between 1/8 and 3/8 of an inch thick. Thinner overlays (1/8 inch) are used for lightly worn surfaces needing a clean coat. Thicker buildups are used where some surface leveling is needed or where a stamped pattern is applied. These are specialty overlay systems, not standard concrete mix — they are formulated to bond to existing concrete and flex slightly with the slab.
Yes, when the right products are used. We specify polymer-modified overlay systems rated for freeze-thaw cycling. Interior-grade or low-quality materials delaminate quickly in Utah winters. The critical factor is that the existing slab must also be in solid condition — a slab that is already scaling or flaking from freeze damage isn't a good resurfacing candidate because the same forces will continue attacking the new surface from below.
Yes. Stampable overlays are a specific product category designed to be applied thin (3/8 to 1/2 inch) and stamped while fresh. The result looks similar to full-depth stamped concrete, and it's a cost-effective way to add a decorative finish to an existing slab that is structurally sound but visually tired. The finish options and color selections are comparable to a full stamped pour.
Concrete Resurfacing — Davis & Weber County
Ready to restore your concrete without the tearout cost?
What our clients say about concrete resurfacing
Concrete Resurfacing Service Areas in Utah
We serve Davis County, Weber County, Salt Lake County, and Utah County. If you are not sure whether we cover your area, call us.
How to get started.
Three simple steps from first call to finished job.
Contact Us
Complete the quick form to share your needs. We respond the same day — often within an hour.
Get free quote →Schedule Your Estimate
We'll arrange a visit at a time that works for you and provide an in-person, plain-english estimate.
Get free quote →Get the Job Done
Once approved, we schedule a date and work hard to exceed expectations. If it's not right, we come back.
Get free quote →